The aviation aftermarket finds itself in an unusual position. Demand for maintenance remains exceptionally strong, aircraft are staying in service longer than originally anticipated and MRO providers continue to benefit from an industry struggling to restore the balance between supply and demand.
Yet beneath that commercial opportunity lies a more uncomfortable question: is the sector becoming a victim of its own success?
For Olivier Legrand, president and chief executive of Revima, the answer is not straightforward. While the specialist APU and landing gear MRO provider continues to benefit from sustained demand, much of that activity reflects structural pressures elsewhere in the aviation industry.
“We continue to enjoy additional maintenance events that are a result of Airbus and Boeing's inability to ramp up as much as the market would like them to,” he explains.
Although there are signs that aircraft production rates are improving, Legrand remains uncertain about how quickly the situation will normalise. Airlines, meanwhile, have a clear incentive to accelerate fleet renewal, “particularly as fuel costs strengthen the commercial argument for operating more efficient, latest-generation aircraft”, says Legrand.
For the aftermarket, this creates an interesting tension. Today's maintenance demand may be providing considerable opportunities, but the industry's longer-term success will “depend on its ability to address the capacity, productivity and supply chain constraints” that continue to hold it back.
A changing aftermarket relationship
One consequence of these pressures is an evolving relationship between OEMs and independent maintenance providers.
With substantial numbers of new aircraft expected to enter service over the coming decade, Legrand believes the associated maintenance requirements will “increasingly exceed what OEM networks can accommodate independently”, he says.
The APU market provides a particularly interesting example, given that certain units are common to both current and previous-generation aircraft.
“It's all going to create significant demand that I don't think the OEMs can cope with, with their own network,” he says. “So they're going to need partners like Revima to support the load.”
Legrand sees parallels with developments in the engine aftermarket, where growing investment by independent providers and closer cooperation with OEMs have become increasingly important in supporting fleet expansion.
For Revima, however, this is not a fundamental departure from its established strategy.
“The positioning that Revima has had for years has always been of being a complement to the OEM networks,” he explains. “We have in our DNA an OEM alignment strategy and it continues that way. I think in the current environment it's definitely a big strength for us.”
Indeed, one of the more surprising developments of the past year has been the willingness of organisations that might previously have managed their requirements internally to seek external assistance.
“We're seeing a lot of partners that years ago would have never asked for help and today are ” Legrand observes. “It is a telling indication of just how extensively capacity constraints are reshaping established aftermarket relationships.”

Reliability before price
The pressure on maintenance capacity is also influencing what airlines expect from their MRO partners.
While cost remains an “important consideration”, Legrand believes operational dependability has “moved decisively to the top of the purchasing agenda”.
“Airlines are very focused on services that are reliable as a first priority,” he says. “Delivery performance and delivering on your promise is a top priority for airlines. And I would say price comes next. That's what changed fundamentally in the industry.”
This shift plays to Revima's emphasis on operational performance, but Legrand is equally conscious that maintenance execution alone is no longer sufficient to differentiate an aftermarket provider.
He points to a recent APU contract with China Airlines covering the Boeing 787 as an example of the company's continued commercial momentum.
However, Revima's broader proposition is increasingly built around “providing services that extend beyond the maintenance event itself”.
“Our new motto is “Additional value. Delivered” Legrand explains. “What we're really trying to focus on is bringing more than just the core expertise we have in MRO and on APUs.”
These additional capabilities include predictive maintenance and digital solutions designed to optimise APU operations and minimise fuel consumption – areas that have become particularly relevant as airlines seek improvements in both operational efficiency and lifecycle costs.
Productivity as a capacity solution
If maintenance demand is likely to remain strong, simply adding more facilities, equipment and personnel cannot be the industry's only response.
For Legrand, productivity has become a critical part of the capacity equation.
“Productivity is absolutely essential in our ability to address the market demand,” he says. “It's not just from a cost perspective, it's also in our ability to increase our throughputs.”
For Revima, this has prompted substantial investment in information systems and the wider digital infrastructure supporting its operations.
Legrand explains that the company selected IFS as its enterprise resource planning (ERP) platform several years ago and is now progressing through the second phase of deployment, extending the system to “encompass supply chain and finance functions.”
Alongside this, Revima is establishing a data lake and embarked on an ambitious artificial intelligence (AI) roadmap which Legrand says is intended to “improve efficiency across both production and administrative activities”.
The potential gains are not confined to the workshop floor. Legrand highlights the quotation process, which can involve “considerable back-and-forth communication”, as one area where digital technologies can reduce processing times and improve responsiveness.
Supply chain management represents another important opportunity.
“We've had machine learning and data analysts, and AI also helping analyse data and optimise our parts flow, anticipate as much as possible, forecast a lot more and be a lot closer to the OEMs to make sure they understand where our demand is,” he explains.
The company is now planning material requirements at least a year ahead, providing OEM partners with substantially greater visibility of anticipated demand.
For an industry still experiencing the consequences of supply chain disruption, that longer planning horizon is becoming an increasingly important operational advantage.
Supporting the entire lifecycle
The continued operation of ageing aircraft presents another challenge, and opportunity, for specialist maintenance providers.
According to Legrand, Revima's strategy has been to “maintain extensive capabilities across mature, end-of-life and latest-generation platforms”, allowing it to support airlines regardless of where their aircraft sit within the operating lifecycle.
“We're focused strictly on APUs and landing gear,” Legrand says. “I think there's nobody in the industry that provides as much capabilities in terms of the various models that we support.”
That breadth of coverage is supported by a range of complementary services, including used serviceable material (USM), leasing solutions, component repair and digital solutions.
“Rather than treating each maintenance event as an isolated transaction, the objective is to help customers manage the total cost of ownership of their assets,” says Legrand.
For Legrand, this is becoming one of the most important strategic directions for the business.
“We've put together a comprehensive offering of services that are all intended to offer to our customers more than just an MRO experience,” he explains.
“Particularly on APUs, it's how do we help our customers to not only address their maintenance requirements, but how can we help them more efficiently operate the units. How do we help them more efficiently manage the lifecycle of those products throughout their life”

Investing in the next generation
Supporting today's ageing fleets is one challenge. Preparing for the maintenance requirements of newer aircraft is another, and one that carries significant investment implications.
Legrand identifies the transition towards next-generation platforms, including the Airbus A350 and Boeing 777X, as an important consideration for Revima's future capital expenditure decisions.
Landing gear maintenance is particularly demanding in this respect, with new technologies requiring substantial investment in processes, equipment and technical capabilities.
One example is the transition from traditional chrome plating towards high-velocity oxygen fuel (HVOF) coating technology.
“We've just made the decision to invest in that technology” Legrand says. “It's a big investment and a big technical challenge as well, but absolutely essential in the control of TAT”
Other emerging technologies will bring further requirements, while airlines will continue to expect maintenance providers to invest in the rotable assets necessary to support their programmes.
These decisions are especially significant in landing gear, where both material costs and capital expenditure requirements can be considerable.
For independent MRO providers, the challenge is therefore not simply identifying where future demand will emerge, but determining when and how much to invest to ensure the necessary capabilities are available.
AI's promise and its limitations
Digitalisation and AI will undoubtedly influence many of those decisions, although Legrand believes the industry is “still navigating how best to exploit their potential”.
“There’s a big question mark on how the industry will deploy the AI tools,” he acknowledges.
Aviation's highly regulated operating environment introduces complexities that are less pronounced in other industries, particularly around cybersecurity, intellectual property protection and the potential consequences of introducing new technologies into critical processes.
There is also a generational dimension, with younger employees bringing considerable enthusiasm for the possibilities offered by emerging AI applications.
For Legrand, the task is to “harness that enthusiasm” without compromising the safeguards on which the industry depends.
“One of the challenges of our industry is how are we going to be able to take full advantage of those capabilities while not putting the business or our customer operations at risk,” he says. We're moving swiftly in that direction, but in a cautious way.”
It is a pragmatic position that reflects the wider balancing act facing the aftermarket: embracing new technologies, expanding capabilities and improving productivity while maintaining the reliability customers increasingly demand.
Ultimately, Legrand's vision for Revima is not simply about handling more maintenance events. It is about becoming more closely involved in how aircraft components are operated, supported and managed throughout their useful lives.
“That's really the direction we're going into,” he concludes. “I think it's going to be very interesting as well a fun ride.”







